Continous Screen Changer
Technical Specification :
| No. | Model | Output | Cart Heaters KW. |
|---|---|---|---|
| 1 | SMC-50 | 60 to 100 | 2.7 |
| 2 | SMC-65/75 | 100 to 180 | 3.97 |
| 3 | SMC-90 | 180 to 250 | 6.8 |
| 4 | SMC-120 | 250 to 450 | 6.8 |
Screen Changer in Operation :
- All Valve are opened with both lines on running position.
- Close Valve 1 & 2 slowly and remove the plunger by puller and replace the mesh.
- The plunger placed in body by puller and tightened both of the plunger than open Valve no. 1 as marked so empty chamber of plunger will fill up the material without disturbing the flow. Then open Valve C for removing inside air and clean the material should come out from this Valve and open Valve No. 1 fully.
- And open Valve No.2 for output than close Valve C. This is again same 2 line working condition.
Accessories :
- Adaptors for mounting the screen changer i.e. die & barrel side.
- Spares – Heaters, Screen packs.
Application & Usage :
- Necessary to use screen changer for filtering the plastic material.
- Leak free design.
- Filter mesh change without stopping the extruder machine.
- Final product will be consistently good.
- 100% production without stopping plant.
Advantages :
- Max. exploration of line due to without stop the plant.
- Elimination of scrap.
- Very easy operation.
- No. wastage of material.
Our Products
